T-Bone Link

The T-Bone link is a Kortel Design exclusive!

All the advantages of the flexible connector (solidity, lightness, multi-axial work, longevity), integrating the brand new "Konnect " quick connection for 10g per unit.

With a breaking load of more than 2400daN, it can be used for all types of connections with support straps of less than 25mm.

For more information, please read this article.

T-Bone Link XL

The T-Bone link XL is a Kortel Design exclusive!

All the advantages of the flexible connector (solidity, lightness, multi-axial work, longevity), with the integration of the brand new "Konnect " quick connection for 29g per unit.

With a breaking load of more than 3000daN, it can be used for all types of connections with support straps of less than 25mm.

For more information, please read this article.

Carabiner light EASE

Ultra-lightweight carabiner designed specifically for the walk & fly pilot. Aluminium alloy construction for lightness (22 g) and high strength (18 Kn). Secure closure by Edelrid's patented Turn-Lock system. They are ideal for 12mm/20mm wide straps.

For more information, please read this article.

Pin-Lock

Paraglider carabiner with a locking mechanism.

Suitable for harness strap widths up to 44mm and riser strap widths up to 25mm.
Adapters for narrower risers are available.

Material: Forged Titanal alloy

Weight: 80 g

Breaking load: 2500 daN
Maximum admissible load for aerial sports 140 daN per carabiner

For more information, please read this article.

Quick Out

Special carabiner designed for helicopter air rescue, which allows quick separation under load.
However, this carabiner requires special care....

In paragliding, the Quick-Out allows you to ditch the wing when using steerable reserve parachutes.

Breaking load: 4000 DaN, individually tested at 2000 DaN.
Locking with double opening system.
Lifetime: 8 years with no limit of flight hours.
Forged Titanal case, insert made of high resistance aluminium alloy 7075 T6.
Weight : 200 g / pcs.

For more information, please read this article.

Automatic carabiner 40mm

Self-locking aluminium carabiner.

Its angled opening simplifies strap installation. It is optimized for a strap width of 40mm.

Working load: Main axis: 2000kg / Cross axis: 1000kg

RESTRICTION: Do not use on the tandem spreader link, or on any link related to the tandem reserve parachute.

CAUTION: Aluminum carabiners are sensitive to fatigue failure. We recommend a maximum life span of 5 years or 500 hours of use. If in doubt, do not hesitate to dispose of your carabiners.

For more information, please read this article.

Carabiner carabiner 20mm

Self-locking aluminium carabiner.

Its sloping opening makes it easy to put the straps in place. It is optimized for strap widths from 10mm to 25mm.

Working load: Main axis: 2400kg

RESTRICTION: Do not use on the tandem spreader link, or on any link related to the tandem reserve parachute.

CAUTION: Aluminum carabiners are sensitive to fatigue failure. We recommend a maximum life span of 5 years or 500 hours of use. If in doubt, do not hesitate to dispose of your carabiners.

For more information, please read this article.

Soft Link

Ultra-light flexible connector(10g per pair), it is ideal for all types of links that do not need to be handled regularly.)

With a breaking load of over 2200daN, it can be used on many types of connections, whose support straps are less than 25mm.

RESTRICTION: Do not use on the tandem spreader link, or on any link related to the tandem reserve parachute.

For more information, please read this article.

Péguet quick links

Stainless steel quick links designed for connecting the harness to the risers, tandem paraglider spreader bars, or rescue parachute attachment.

For free flight, we recommend a breaking load higher than 2400daN to allow use on all types of links. Please consult the Péguet website to determine the corresponding working load written on the links (WLL)

Recommendations :

Complete closure of the nut on the thread of the rod, respecting the recommended tightening torque.
Use only in the longitudinal direction (major axis), the nut remaining free of any stress; the minor axis is never taken into consideration during assembly.

For more information, please read this article.