Kortel Design

Home > Technical Support > Kuik II > Mounting the rescue parachute on the Kuik II kocon module

Mounting the rescue parachute on the Kuik II kocon module

Updated the Thursday 17 April 2014

JPEG - 252.9 kb

JPEG - 271.1 kb

Connect the rescue to the bridles.

JPEG - 243.7 kb

Connect the rescue handle on the side of the pod.

JPEG - 260.2 kb

Put the rescue into the 2 firsts lycra flaps, equiped wit the blue loops. Use the joined pins to close the container.

JPEG - 237 kb

Pass the pins into rings of the 2 lateral flap.

JPEG - 230.4 kb

Pass the pins into the rings of the central flap.

JPEG - 230.1 kb

Pass the pins into the rings situated under the kockpit flap.

JPEG - 214.8 kb

Put the 2 pins of the rescue handle inside the blue loops, to close the rescue container. Remove the 2 mounting pins.
CAUTION : only 1 pin by blue loop !

JPEG - 243.1 kb
Site powered by SPIP | Kortel Design - 1096, avenue André Lasquin 74700 Sallanches France - +33950107327 - info@korteldesign.com