Kortel Design

Home > Harnesses > Rescue handle safety notice.

Rescue handle safety notice.

Wednesday 23 December 2015

Further to the problem on the rescue handles of this beginning of year, we set up a number of additional controls at the level of the production.
Unfortunately, it seems that some rescue handles can again present a similar defect.

We invite all the pilots to check their rescue handle.

PNG - 587.2 kb

The harness’s models are :

  • Karma II
  • Krashbox Module Kuik II Rescue handles can be with 2 or 3 pins.

We ask to every pilot to check their own rescue handle, following the below procedure.

Test procedure :

  • Take the rescue handle in one hand.
  • With the second one, pull on each pins separately.

If the rescue handle has the problerm, the pin will slide into the rescue handle body.

After pulling the pins, if they are still at the same lenght, the rescue handle is OK.

If the pins slides inside the body, please contact Kortel Design quickly to receive a new one.

PNG - 311.1 kb

In all cases, do not hesitate to contact Kortel Design if you have any questions.

Site powered by SPIP | Kortel Design - 1096, avenue André Lasquin 74700 Sallanches France - +33950107327 - info@korteldesign.com