Wednesday 25 February 2015
We just learnt a potential quality problems on some rescue handles.
The harness’s models are :
Today, we record only 2 cases, but we prefer to ask to every pilot to check their own rescue handle, following the below procedure.
Test procedure :
If the rescue handle has the problerm, the pin will slide into the rescue handle body.
After pulling the pins, if they are still at the same lenght, the rescue handle is OK.
If the pins slides inside the body, please contact Kortel Design quickly to receive a new one.
In all cases, do not hesitate to contact Kortel Design if you have any questions.